5836e35f

8.19. The blocking mechanism at "parking"

33 — the gear shifting selector Lever
33a — the Sealing ring
34 — Conic draft
35 — the Doggie
36, 60 — Bolts
50 — Draft
51 — the Directing plug
51a, 55a, 141a — Sealing rings

51b — the Directing spring
52, 56 — Lock rings
53 — a blocking Doggie at "Parking"
54 — Pruzhina
55, 141 — Fingers
139 — the Blocking doggie
140 — the Torsion spring


Removal

 PERFORMANCE ORDER

1. Remove the lever of gear shifting having turned off bolts 60.
2. Remove a doggie 35 together with conic draft 34.
3. Turn off a bolt 36.
4. Remove a finger 141.
5. Take draft 50 of the case of transmission and unhook a blocking doggie 139.
6. Remove a lock ring 52 from the directing plug 51.
7. Press a doggie 53 blocking at "Parking" opposite to a spring 54 and a vypressuyta the directing plug 51 of the transmission case.
8. Remove a lock ring 56 and a finger 55.
9. Remove a doggie 53 blocking at "Parking" with a spring 54.


Installation

 PERFORMANCE ORDER

1. Install a doggie 53 blocking at "Parking" and a spring 54 in the case of transmission and establish a finger 55 with a lock ring 56.
2. Press a blocking doggie at "Parking" 53 opposite to a spring 54 against the stop and insert the directing plug 51 into the transmission case so that teeths of a doggie 53 blocking at "Parking" were established on the middle of the directing plug.
3. Establish a lock ring 52.
4. Install draft 50 in the case of transmission and fasten a blocking doggie.
5. Establish a finger 141.
6. Tighten a bolt 36.
7. Establish a doggie 35 with conical draft 34.
8. Fix the lever of the selector of gear shifting 33.