1. Grease an external part of the blocking cylinder 36 with sealant and insert a cover 36b. 2. Install a key through a cover 36b in the blocking cylinder 36 against the stop. The groove (shooter) on the blocking cylinder 36 has to be combined with a groove on the lock of blocking of a steering shaft (shooter). 3. Install the blocking cylinder 36 in the lock of blocking of a steering shaft. 4. Turn a cover 36b with the plug 011 clockwise on 90 ° so that it was possible to block it. 5. Turn a key in situation "0" and remove the plug 011. 6. Tighten a guard 36a on the dashboard by means of a key 020 (models without immobilizer). 7. Press the L11 coil on the blocking cylinder. |